As an Amazon Associate I earn from qualifying purchases.

What Happens If the Chain Breaks While Using a Chainsaw?

Save 40.0% on select products from GreenWind with promo code 40Z4J4V9, through 1/11 while supplies last.

If the chain breaks while using a chainsaw, it can be extremely dangerous. The chain can break at high speeds and can cause serious injury or even death. If you are using a chainsaw, always check the chain before use and be sure to replace it if it is damaged or worn.

If the chain on your chainsaw breaks while you’re using it, there’s a good chance you could end up seriously injured. The chain is what helps keep the saw blade moving, and if it snaps, the blade can quickly stop or even change direction, potentially causing serious injury to you or anyone else nearby. If you’re lucky, the chain will just snap and the saw will shut off automatically.

But if you’re not so lucky, the blade can keep going and cause some serious damage. So what should you do if this happens? First of all, don’t panic.

If possible, carefully set the saw down on a flat surface and turn it off. Then take a close look at the chain to see how bad the damage is. If there are just a few broken links, then you might be able to repair it yourself with a new chain link.

But if more than half of the links are broken, then it’s probably best to replace the entire chain. If you’re not sure how to fix or replace the chain yourself, then it’s time to call in a professional. In most cases, they’ll be able to get your chainsaw up and running again in no time.

And if not, at least you know you won’t be responsible for any accidents that might happen!

Chainsaw – Chain Break

Chainsaw Chain Brake

If you’re a chainsaw user, then you know that one of the most important safety features on your saw is the chain brake. This brake is designed to stop the chain from moving if it comes in contact with your body. There are two types of chain brakes: manual and automatic.

The type that you have will depend on the model of chainsaw that you own. Automatic chain brakes are engaged when the saw’s kickback forces cause the nose tip of the guide bar to move upward into contact with an internal spring-loaded stop switch. This action deactivates the saw’s motor, stopping the rotation of both the guide bar and cutting chain within milliseconds.

Manual chain brakes, on the other hand, are activated by depressing a lever located near your left hand grip with your thumb or fingers. Some models also have a second lever near the right-hand grip for added safety.When either type of brake is engaged, it puts pressure on an idler wheel mounted above and behind the cutting teeth which stops rotation of the cutting chain almost immediately. It’s important to note that while a manual or automatic brake can help reduce injury in certain situations, they are not 100% effective at preventing kickback injuries from occurring altogether – only proper operator technique can do that!

Chainsaw Chain Catcher

If you’re a chainsaw user, then you know that one of the most important safety features on your saw is the chain catcher. This small device attaches to the bottom of the saw’s guide bar and helps to prevent the chain from flying off if it should break. While a broken chain is not a common occurrence, it can happen, and when it does, it can be very dangerous.

That’s why every chainsaw user should have a chain catcher installed on their saw. There are two main types of chain catchers: manual and automatic. Manual chain catchers are the most common type and they work by physically stopping the chain if it breaks.

Automatic chain catchers are less common, but they’re also more effective at preventing injuries because they automatically disengage the saw’s power when the chain breaks. No matter which type of chain catcher you have, though, it’s important to inspect it regularly to make sure that it’s in good working condition. If you notice any damage or wear, replace the catcher immediately.

How to Tell If a Chainsaw Chain is Bad?

How to tell if a chainsaw chain is bad: If you’re not sure whether your chainsaw chain is still good or not, there are a few things you can check for. First, look at the teeth on the chain.

If they’re excessively dull or damaged, then it’s time to replace the chain. Another thing to look for is any damage to the links themselves. If any of the links are bent, cracked, or otherwise damaged, then it’s also time for a new chain.

Finally, pay attention to how well your chainsaw cuts. If it’s not cutting as well as it used to, or if it gets bogged down easily when cutting through wood, then that’s a sign that the chain is no longer performing optimally and should be replaced.

Chainsaw Chaps

Chainsaw chaps are a type of personal protective equipment (PPE) worn by people who operate chainsaws. They are made of a durable fabric, usually Kevlar or another high-strength material, and they cover the legs from the waist down. Chainsaw chaps provide protection against the kickback of a chainsaw, as well as against contact with the saw blade.

Chainsaw chaps were first developed in the early 1970s, and they have been required PPE for many professional logger and arborist organizations since that time. Some home users also choose to wear them when operating a chainsaw. While chainsaw chaps will not completely prevent injuries from a chainsaw, they can significantly reduce the severity of an injury if one does occur.

If you are going to be operating a chainsaw, make sure you wear proper PPE including chainsaw chaps!

What Happens If the Chain Breaks While Using a Chainsaw?


What Happens If a Chain on the Chainsaw Breaks?

If a chain on the chainsaw breaks, it can be extremely dangerous. The chain can easily fly off of the saw and hit somebody nearby, causing serious injury. If you are operating the chainsaw when the chain breaks, you could also lose control of the saw and hurt yourself.

It is important to always keep a close eye on the condition of your chainsaw chain and replace it if it starts to look worn or damaged.

Will a Chainsaw Run Without the Chain Brake?

Most chainsaws have a chain brake that is designed to stop the chain from moving if the saw kicks back. However, it is possible to run a chainsaw without the chain brake. If the chain brake is not working properly, it can cause the chain to continue spinning even after the saw has been turned off.

This can be extremely dangerous and should be avoided at all costs.

What Happens When a Chain Breaks?

When a chain breaks, it can cause serious injury. If the chain is not properly repaired, it can also cause the vehicle to become disabled.

What Causes Chainsaw Chains to Break?

Chainsaw chains break for a variety of reasons. The most common causes are operator error, dull chain, and improper tension. Operator error is the number one cause of chainsaw chain breakage.

This can include things like not using the correct type of oil, not properly lubricating the chain, or running the chain too fast. Dull chains are also a major cause of breakage. When a chain gets too dull, it puts extra strain on the motor and can cause the chain to snap.

Improper tension is another leading cause of breakage. If the chain is too loose, it can come off the saw completely; if it’s too tight, it can put undue stress on the engine and cause premature wear or even seizure. Fortunately, there are ways to prevent all of these common causes of chainsaw chain breakage.

First and foremost, always follow your saw’s manufacturer guidelines for proper use and maintenance. Keep your chain sharpened and well-oiled at all times, and be sure to check your tension regularly to ensure that it’s just right. With a little care and attention, you can keep your chainsaw running smoothly for years to come!


If the chain breaks while you’re using a chainsaw, it can be dangerous. The saw could kick back and hit you, or the chain could get tangled in the tree you’re cutting. If the chain breaks, stop using the saw and inspect it.

Make sure that the tension is correct and that there aren’t any damaged links. If everything looks okay, you can try restarting the saw. If the chain breaks again, take it to a professional for repairs.

Rate this post
James R. Robertson
James R. Robertson

James R. Robertson is an expert advisor in all types of saws. His hobby is using different types of saw tools and has over 8 years of experience. Based on his experience with different types of saws, he is sharing his opinion about various saws. So that a beginner can get started right away. Happy reading!

Find Him On...

Leave a Comment